Datalogic Scanning Falcon 4400 Series Manuel d'utilisateur télécharger pdf

Falcon

4400 Series

Serial Printer Adapter

Installation Instructions

The Falcon 4400 Series Serial Printer Adapter attaches to the

bottom of a Falcon 44XX unit and allows you to connect and

print directly to a printer.

Removing Strap Studs/Bumpers

To attach the printer adapter to a Falcon, you must

remove the strap studs, as well as the optional strap

stud bumpers, if present.

1. Loosen and pull off the strap stud bumpers (if

present). If necessary, pry off using a screwdriver.

2. Use a 5/64” Allen wrench (included with the

printer adapter kit) to loosen and remove each

Strap Stud.

Once you have removed the strap studs, attach the

adapter to the Falcon by sliding into place and

tightening the thumbscrews on the adapter.

Strap Studs

Strap Stud

Bumpers

Attaching the Serial Printer Adapter

Pas de commentaire

Datalogic Scanning Falcon 4400 Series Manuel d'utilisateur