Datalogic-scanning DL Cordless Card DLCC Manuel d'utilisateur Page 31

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 55
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 30
PARAMETER ISSUES AND DEFINITIONS
4
Case 2 – DLCC as Client (like an RF device)
HOST
Client
Figure 6 - DLCC Client
In the figure above, DLCC is a Client (as an RF device). The following parameters
may be set depending on the application:
STAR
Modem™ - ACK/NACK = enabled
STAR-System™ - Rx / Tx = enabled
If DLCC - Transmission Mode = 1 way
ACK/NACK from Remote Host = disabled
FIFO = disabled
Handshaking = modem (RTS/CTS)
In this case, DLCC sends data (messages) to the Remote Host. The special
case of FIFO disabled blocks transmission until an acknowledgement is received
from Host. Because ACK/NACK is enabled for STAR
Modem™, only after this
has received an ACK from the Remote Host does it acknowledge reception
(Empty Answer to DLCC).
17
Vue de la page 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Commentaires sur ces manuels

Pas de commentaire