Datalogic Scanning Controller SC6000 Manuel d'utilisateur télécharger pdf (Page 20)

SC6000

2.4 ELECTRICAL CONNECTIONS

The connectors available for each scanner model are the following:

Scanner Model Connector Type

Power/Net 25-pin male power supply, lonworks and

input/output signals

Extended I/O 25-pin female extended I/O signals (optoisolated)

Modem 9-pin male modem connection

Main 9-pin female RS232/RS485 main serial connection

Aux 9-pin female RS232 auxiliary connection

All models

Eth-1 RJ45 modular Ethernet network

- 1230

Eth-2 RJ45 modular Ethernet network

- 1211

Profibus 9-pin female Profibus network

- 1215

DeviceNet 5-pin male DeviceNet network

2.4.1 Auxiliary Interface

The auxiliary serial interface is equipped with RS232 interface connections. The interface

can be enabled or disabled through the Genius™ configuration program.

The following pins of the 9-pin connector are used for RS232 interface connection:

9-pin D-sub Female Connector Pinout

Pin Name Function

2 TX Transmit

3 RX Receive

5 GND Ground

9-pin D-sub Female Connector

SC6000

USER INTERFACE (Laptop)

GND

Signal Ground

TXD

RXAUX

RXD

TXAU

Shield

Figure 14 - RS232 Auxiliary Interface Connections

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Pas de commentaire

Datalogic Scanning Controller SC6000 Manuel d'utilisateur Page 20