Datalogic-scanning C-BOX 300 Manuel d'utilisateur télécharger pdf (Page 19)

INSTALLATION

NOTE

Autoconnection is not compatible with Matrix readers and must be

disabled in the C-BOX 3x0 configuration. See par. 2.9 for details.

To disable this automatic connection procedure, refer to WinHost Help Online.

After system functioning has been verified, close the C-BOX 3X0 using the 4 cover

screws making sure the rubber seal is fitted correctly between the parts of the

housing.

2.4.1 Power Supply

Power is supplied to the C-BOX 3X0 through the pins provided on the spring clamp

connector.

The power switch (see Figure 6) switches the power supply ON or OFF for both the

C-BOX 3X0 and the connected scanner.

OFF

Figure 6 - Power Switch ON/OFF Positions

C-BOX

GND

USER INTERFACE

GND

V+ (10 - 30 Vdc)

Figure 7 - Power Supply Connections

The power supply must be between 10 and 30 Vdc only.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Pas de commentaire

Datalogic-scanning C-BOX 300 Manuel d'utilisateur Page 19